KindPack EuroHang Side-Gusset Pouch
Pegboard-ready side-gusset pouch with a punched euro slot and a stiffened header that keeps it hanging flat. Rebuilt into the KP-ECO-006 Companion Small-Pet Side-Gusset Feed Pouch green parameter family: mono-material side-gusset feed-pouch direction. Blank front panel, no brand on the pack. All specifications are Draft / Indicative / To Confirm - not a quote.
Specifications
| Product Type | Side-Gusset Flat Pouch with Euro Hang Hole | Structure | Side-Gusset Flat Pouch with Euro Hang Hole |
|---|---|---|---|
| Closure | Center euro-slot hang hole plus resealable press-to-close strip | Material direction | Mono-material side-gusset feed-pouch direction |
| Thickness | 95-125 micron total at the body; header zone stiffened by an insert board of approx. 300-400 micron | Standard sizes | 5 oz / 10 oz / 16 oz (142 g / 283 g / 454 g) |
| Finished dimensions | 5 oz / 10 oz / 16 oz (142 g / 283 g / 454 g). Finished size W x H + side gusset, excluding header (mm): 5 oz approx. 140 x 230 + 35; 10 oz approx. 165 x 270 + 40; 16 oz approx. 190 x 300 + 45; | Flexographic surface print, up to 8 stations, water-based inks, with print clear of the gusset folds | |
| Finish | Matte finish throughout with a smooth seal band at the top; no foil, no metallic ink | Window | A wide clear unprinted band is available on the front so the pellet colour and fill level read through; the clear zone uses the same PE film rather than a separate window patch |
| Handle | None on 1 lb and 2.5 lb; a punched finger-hole or a soft die-cut handle on the 5 lb size | Valve or spout | None. Dry pelleted feed only, with no valve or spout offered |
| Environmental status | Claim pending - not verified | MOQ | 5,000 pcs / SKU (first run) |
| Lead time | Sample: 10-15 business days; mass production: 25-38 business days | Commercial terms | Ex-works unit price and shipping terms to be confirmed on quotation |
About this product
EuroHang is built for the peg strip. A punched euro slot sits in a stiffened header so the pouch hangs straight instead of curling, and the flat side-gusset face gives tooth-and-claw graphics a clean surface. Resealable after opening, it keeps dental chews from drying out between uses. The bold typographic system uses flat color blocks that stay legible in a phone photo, and the matte white copy area keeps ingredient claims readable under store lighting. In the rebuilt 36-SKU green matrix this product is re-homed to parameter family KP-ECO-006 - Companion Small-Pet Side-Gusset Feed Pouch - on the basis of structure-first match: flat side-gusset pouch; the euro-slot pegboard header and chew fill are carried as format variants of the family. The family design direction is: Keep the structure mono-material PE and skip any paper layer that pellet dust would compromise; use water-based inks; taper the gusset film to cut material use where the seal allows; keep the zipper in the same polymer family so the closure does not interrupt a film recovery route; and avoid metallic inks entirely. The front panel stays blank and carries no brand of ours, so the buyer's own label can be applied. Nothing here is a verified environmental statement: CLAIM PENDING - NOT VERIFIED. No recyclability, recycled-content or mono-material claim is validated for this SKU. Store drop-off eligibility for a side-gusset pack of this thickness, the effect of the zipper profile on any recovery route, and any PCR figure all remain unverified. Only the wording 'mono-material PE direction - claim status under verification' may be used until supplier declarations and an independent assessment are on file. Duties & taxes are not included in quoted prices.
Engineered for US and Canadian pegboard and strip merchandising, where a punched euro slot on a stiffened header keeps the pack hanging square and readable from three feet. Re-homed into the KP-ECO-006 family, the North America positioning holds: Targeted at US and Canadian pet specialty and farm-store chains where the companion-animal aisle is stocked by the same buyers as dog and cat. The wide-mouth bin shape is a handling advantage for scoop users, the pack stacks flat before filling, and the blank front panel suits a buyer label over a large printable area.
Key Features
✓ Punched euro slot in a stiffened header for straight hanging
✓ Flat front face for high-contrast graphic systems
✓ Reseal strip keeps chews from drying out
✓ Header rigidity available with or without a board insert
✓ Mono-material side-gusset build direction with matched-polymer closure parts - claim pending verification
FAQ
Is your company a manufacturer or a trading company?
We are a direct manufacturer with our own factory in Dongguan, Guangdong, China, founded in 2014. You are welcome to arrange a virtual or on-site factory tour.
Can your packaging be customized?
Yes. We provide full OEM/ODM services including custom printing, size, material structure, pouch type, zipper / spout / handle options, and artwork support.
What types of packaging bags can you produce?
We produce stand-up pouches, flat bottom bags, spout pouches, retort pouches, side gusset bags, quad seal bags, kraft paper bags, mono-material recyclable bags, window bags, and bulk bags.
How do I request a quotation?
Please share your bag type, target size, estimated order quantity, material preference, and design artwork (AI or PDF). Our sales team will reply with a detailed quotation and sampling plan.
How can I contact you?
Use the inquiry form on this page, email us, or reach us via WhatsApp / WeChat. A dedicated project manager will follow up within one business day.
Request a Quote
Tell us quantity, size and target market — our team replies within one business day.
Send Inquiry