KindPack HeatHold Retort Pouch
Retort-grade wet food pouch built to withstand thermal processing and stack flat in storage. Rebuilt into the KP-ECO-005 Mono-PP Spout Pouch for Wet Food and Gravy Toppers green parameter family: mono-material PP spout-pouch direction. Blank front panel, no brand on the pack. All specifications are Draft / Indicative / To Confirm - not a quote.
Specifications
| Product Type | Retort Pouch for Thermally Processed Wet Food | Structure | Retort Pouch for Thermally Processed Wet Food |
|---|---|---|---|
| Closure | Easy-peel tear notch with an optional resealable press-to-close strip on family sizes | Material direction | Mono-material PP spout-pouch direction |
| Thickness | 120-160 micron total | Standard sizes | 3 oz / 5 oz / 13 oz (85 g / 142 g / 368 g) |
| Finished dimensions | 3 oz / 5 oz / 13 oz (85 g / 142 g / 368 g). Finished size W x H (mm): 3 oz approx. 100 x 140 fin-seal, or 120 x 160 stand-up; 5 oz approx. 110 x 160 fin-seal; 13 oz approx. 140 x 200 + 55 bottom gusset. | Flexographic surface print, up to 8 stations, water-based inks; print area clear of the spout weld zone | |
| Finish | Gloss body with a matte varnish band behind the front panel; no foil, no metallised layer | Window | A clear, unprinted film zone is possible so the fill level reads through the front panel; this is a material-transparency option rather than a separate window film, and it is to be confirmed against the mono-PP build |
| Handle | None. Not applicable to this retail format | Valve or spout | Welded screw-cap spout with tamper-evident ring; spout sizes and cap colours to be confirmed. This SKU is spout-only, with no degassing valve |
| Environmental status | Claim pending - not verified | MOQ | 10,000 pcs / SKU (first run) |
| Lead time | Sample: 15-20 business days; mass production: 35-50 business days | Commercial terms | Ex-works unit price and shipping terms to be confirmed on quotation |
About this product
HeatHold brings wet food into a flexible format. Retort-grade seals and cast polypropylene layers allow the pouch to survive a full cook cycle, then ship lighter and store flatter than cans or trays. The easy-peel tear opens cleanly without a can opener or a knife, and family sizes can add a resealable strip for partial use. Heritage butcher-block graphics frame a fresh-food positioning for brands competing against premium refrigerated lines. In the rebuilt 36-SKU green matrix this product is re-homed to parameter family KP-ECO-005 - Mono-PP Spout Pouch for Wet Food and Gravy Toppers - on the basis of structure-first match: mono-pp wet-fill pouch; the retort process window is carried as a variant of the spout-pouch family build. The family design direction is: Specify a PP film and a PP spout fitment so the pouch body and the only rigid component share one polymer family; keep the ink load low and water-based; avoid aluminium foil and metallised layers that a wet-fill barrier would otherwise invite; and design the pouch so the cap can later be specified as a compatibly sized standard fitment. The front panel stays blank and carries no brand of ours, so the buyer's own label can be applied. Nothing here is a verified environmental statement: CLAIM PENDING - NOT VERIFIED. No recyclability or mono-material claim is validated for this SKU. The spout and cap are the critical unknown: a mono-material claim for the pouch body is meaningless unless the fitment is matched to the same polymer family and the pack is assessed as a whole. Hot-fill suitability, seal integrity and any recovery route must be tested. Wording stays at 'mono-material PP direction - whole-pack claim pending verification of the spout fitment'. Duties & taxes are not included in quoted prices.
Sized for US and Canadian wet-food and fresh-refrigerated programs, where a retort pouch ships lighter and stores flatter than a can or tray while still supporting a high-temperature cook. Re-homed into the KP-ECO-005 family, the North America positioning holds: Built for the US and Canadian wet-food and topper shelf, where single-serve and multi-serve squeeze pouches are growing fastest in the cat aisle and in dog meal-mixer sets. The pouch stands and squeezes cleanly over a bowl, and the blank front panel leaves room for the buyer's brand plus a clean product-window read of the fill.
Key Features
✓ Retort-capable construction direction for thermal processing
✓ Easy-peel opening with no tools required
✓ Flat storage and light shipping versus cans and trays
✓ Temperature-stable inks and matte claim band
✓ Mono-material PP spout-pouch direction so body and fitment can follow one stream - claim pending verification
FAQ
Is your company a manufacturer or a trading company?
We are a direct manufacturer with our own factory in Dongguan, Guangdong, China, founded in 2014. You are welcome to arrange a virtual or on-site factory tour.
Can your packaging be customized?
Yes. We provide full OEM/ODM services including custom printing, size, material structure, pouch type, zipper / spout / handle options, and artwork support.
What types of packaging bags can you produce?
We produce stand-up pouches, flat bottom bags, spout pouches, retort pouches, side gusset bags, quad seal bags, kraft paper bags, mono-material recyclable bags, window bags, and bulk bags.
How do I request a quotation?
Please share your bag type, target size, estimated order quantity, material preference, and design artwork (AI or PDF). Our sales team will reply with a detailed quotation and sampling plan.
How can I contact you?
Use the inquiry form on this page, email us, or reach us via WhatsApp / WeChat. A dedicated project manager will follow up within one business day.
Request a Quote
Tell us quantity, size and target market — our team replies within one business day.
Send Inquiry