KindPack MeasureCap Doypack
Powder pouch with a graduated measuring cap that doses without a separate scoop and stores on the spout. Rebuilt into the KP-ECO-005 Mono-PP Spout Pouch for Wet Food and Gravy Toppers green parameter family: mono-material PP spout-pouch direction. Blank front panel, no brand on the pack. All specifications are Draft / Indicative / To Confirm - not a quote.
Specifications
| Product Type | Stand-Up Pouch with Integrated Measuring-Cap Pour Spout | Structure | Stand-Up Pouch with Integrated Measuring-Cap Pour Spout |
|---|---|---|---|
| Closure | Wide-mouth spout with a graduated screw-on measuring cap that doubles as a scoop | Material direction | Mono-material PP spout-pouch direction |
| Thickness | 115-150 micron total | Standard sizes | 500 g / 1 kg / 2 kg (17.6 oz / 2.2 lb / 4.4 lb) |
| Finished dimensions | 500 g / 1 kg / 2 kg (17.6 oz / 2.2 lb / 4.4 lb). Finished size W x H + bottom gusset (mm): 500 g approx. 180 x 270 + 65; 1 kg approx. 230 x 330 + 75; 2 kg approx. 270 x 390 + 90. | Flexographic surface print, up to 8 stations, water-based inks; print area clear of the spout weld zone | |
| Finish | Gloss body with a matte varnish band behind the front panel; no foil, no metallised layer | Window | A clear, unprinted film zone is possible so the fill level reads through the front panel; this is a material-transparency option rather than a separate window film, and it is to be confirmed against the mono-PP build |
| Handle | None. Not applicable to this retail format | Valve or spout | Welded screw-cap spout with tamper-evident ring; spout sizes and cap colours to be confirmed. This SKU is spout-only, with no degassing valve |
| Environmental status | Claim pending - not verified | MOQ | 5,000 pcs / SKU (first run) |
| Lead time | Sample: 15-20 business days; mass production: 32-48 business days | Commercial terms | Ex-works unit price and shipping terms to be confirmed on quotation |
About this product
MeasureCap builds the scoop into the closure. A graduated screw-on cap measures the dose, then screws back onto the spout so it never disappears into the powder. That matters for milk replacer and supplements where an inaccurate scoop affects outcomes and triggers complaints. A rigid spout collar handles the repeated twisting of daily use, and the high-barrier body protects hygroscopic powders from clumping. A digital gradient mesh gives a measured, formulation-forward tone for veterinary-channel products. In the rebuilt 36-SKU green matrix this product is re-homed to parameter family KP-ECO-005 - Mono-PP Spout Pouch for Wet Food and Gravy Toppers - on the basis of structure-first match: large-bore welded spout with a screw cap; the graduated measuring cap is a fitment variant and the fill is dry. The family design direction is: Specify a PP film and a PP spout fitment so the pouch body and the only rigid component share one polymer family; keep the ink load low and water-based; avoid aluminium foil and metallised layers that a wet-fill barrier would otherwise invite; and design the pouch so the cap can later be specified as a compatibly sized standard fitment. The front panel stays blank and carries no brand of ours, so the buyer's own label can be applied. Nothing here is a verified environmental statement: CLAIM PENDING - NOT VERIFIED. No recyclability or mono-material claim is validated for this SKU. The spout and cap are the critical unknown: a mono-material claim for the pouch body is meaningless unless the fitment is matched to the same polymer family and the pack is assessed as a whole. Hot-fill suitability, seal integrity and any recovery route must be tested. Wording stays at 'mono-material PP direction - whole-pack claim pending verification of the spout fitment'. Duties & taxes are not included in quoted prices.
For US and Canadian supplement and milk-replacer brands where dosing accuracy drives repeat purchase; the graduated cap removes the need for a separate scoop and reduces dosing errors in multi-animal households. Re-homed into the KP-ECO-005 family, the North America positioning holds: Built for the US and Canadian wet-food and topper shelf, where single-serve and multi-serve squeeze pouches are growing fastest in the cat aisle and in dog meal-mixer sets. The pouch stands and squeezes cleanly over a bowl, and the blank front panel leaves room for the buyer's brand plus a clean product-window read of the fill.
Key Features
✓ Graduated cap doubles as a scoop and stays on the spout
✓ Rigid spout collar supports daily open and close cycles
✓ High-barrier body limits clumping in hygroscopic powders
✓ Gradation icons printed for clear dosing reference
✓ Mono-material PP spout-pouch direction so body and fitment can follow one stream - claim pending verification
FAQ
Is your company a manufacturer or a trading company?
We are a direct manufacturer with our own factory in Dongguan, Guangdong, China, founded in 2014. You are welcome to arrange a virtual or on-site factory tour.
Can your packaging be customized?
Yes. We provide full OEM/ODM services including custom printing, size, material structure, pouch type, zipper / spout / handle options, and artwork support.
What types of packaging bags can you produce?
We produce stand-up pouches, flat bottom bags, spout pouches, retort pouches, side gusset bags, quad seal bags, kraft paper bags, mono-material recyclable bags, window bags, and bulk bags.
How do I request a quotation?
Please share your bag type, target size, estimated order quantity, material preference, and design artwork (AI or PDF). Our sales team will reply with a detailed quotation and sampling plan.
How can I contact you?
Use the inquiry form on this page, email us, or reach us via WhatsApp / WeChat. A dedicated project manager will follow up within one business day.
Request a Quote
Tell us quantity, size and target market — our team replies within one business day.
Send Inquiry