KindPack PourMate Spout Pouch
Screw-cap spout pouch for liquid toppers and broths, designed for controlled pouring and clean resealing. Rebuilt into the KP-ECO-005 Mono-PP Spout Pouch for Wet Food and Gravy Toppers green parameter family: mono-material PP spout-pouch direction. Blank front panel, no brand on the pack. All specifications are Draft / Indicative / To Confirm - not a quote.
Specifications
| Product Type | Spout Pouch with Screw Cap | Structure | Spout Pouch with Screw Cap |
|---|---|---|---|
| Closure | Center-fit screw cap with a tamper-evident break ring on a rigid spout | Material direction | Mono-material PP spout-pouch direction |
| Thickness | 105-135 micron total; retort track would be 120-160 micron | Standard sizes | 250 ml / 500 ml / 1 L (8.5 oz / 17 oz / 34 oz) |
| Finished dimensions | 250 ml / 500 ml / 1 L (8.5 oz / 17 oz / 34 oz). Finished size W x H + bottom gusset (mm): 250 ml approx. 130 x 200 + 50; 500 ml approx. 160 x 240 + 60; 1 L approx. 200 x 290 + 75. | Flexographic surface print, up to 8 stations, water-based inks; print area clear of the spout weld zone | |
| Finish | Gloss body with a matte varnish band behind the front panel; no foil, no metallised layer | Window | A clear, unprinted film zone is possible so the fill level reads through the front panel; this is a material-transparency option rather than a separate window film, and it is to be confirmed against the mono-PP build |
| Handle | None. Not applicable to this retail format | Valve or spout | Welded screw-cap spout with tamper-evident ring; spout sizes and cap colours to be confirmed. This SKU is spout-only, with no degassing valve |
| Environmental status | Claim pending - not verified | MOQ | 5,000 pcs / SKU (first run) |
| Lead time | Sample: 12-18 business days; mass production: 30-45 business days | Commercial terms | Ex-works unit price and shipping terms to be confirmed on quotation |
About this product
PourMate replaces the jar for liquid toppers. A welded rigid spout with a tamper-evident screw cap lets the customer pour a measured stream over kibble without a funnel or a spoon, then reseal without drips. The shoulder seal is reinforced for handling at 1 L, and the clear fill-level strip makes remaining volume visible. A watercolor meadow palette supports a gentle, natural positioning for broth, pumpkin puree and gravy toppers. In the rebuilt 36-SKU green matrix this product is re-homed to parameter family KP-ECO-005 - Mono-PP Spout Pouch for Wet Food and Gravy Toppers - on the basis of structure-first match: welded rigid spout with screw cap for a liquid fill. The family design direction is: Specify a PP film and a PP spout fitment so the pouch body and the only rigid component share one polymer family; keep the ink load low and water-based; avoid aluminium foil and metallised layers that a wet-fill barrier would otherwise invite; and design the pouch so the cap can later be specified as a compatibly sized standard fitment. The front panel stays blank and carries no brand of ours, so the buyer's own label can be applied. Nothing here is a verified environmental statement: CLAIM PENDING - NOT VERIFIED. No recyclability or mono-material claim is validated for this SKU. The spout and cap are the critical unknown: a mono-material claim for the pouch body is meaningless unless the fitment is matched to the same polymer family and the pack is assessed as a whole. Hot-fill suitability, seal integrity and any recovery route must be tested. Wording stays at 'mono-material PP direction - whole-pack claim pending verification of the spout fitment'. Duties & taxes are not included in quoted prices.
Targets the fast-growing US and Canadian functional-topper category, where a screw cap allows precise pouring over kibble and delivers a resealable, drip-controlled user experience that rigid jars cannot match. Re-homed into the KP-ECO-005 family, the North America positioning holds: Built for the US and Canadian wet-food and topper shelf, where single-serve and multi-serve squeeze pouches are growing fastest in the cat aisle and in dog meal-mixer sets. The pouch stands and squeezes cleanly over a bowl, and the blank front panel leaves room for the buyer's brand plus a clean product-window read of the fill.
Key Features
✓ Rigid spout with tamper-evident screw cap
✓ Drip-controlled pouring for precise topper portions
✓ Clear fill-level strip shows remaining volume
✓ Reinforced shoulder seal for 1 L handling
✓ Mono-material PP spout-pouch direction so body and fitment can follow one stream - claim pending verification
FAQ
Is your company a manufacturer or a trading company?
We are a direct manufacturer with our own factory in Dongguan, Guangdong, China, founded in 2014. You are welcome to arrange a virtual or on-site factory tour.
Can your packaging be customized?
Yes. We provide full OEM/ODM services including custom printing, size, material structure, pouch type, zipper / spout / handle options, and artwork support.
What types of packaging bags can you produce?
We produce stand-up pouches, flat bottom bags, spout pouches, retort pouches, side gusset bags, quad seal bags, kraft paper bags, mono-material recyclable bags, window bags, and bulk bags.
How do I request a quotation?
Please share your bag type, target size, estimated order quantity, material preference, and design artwork (AI or PDF). Our sales team will reply with a detailed quotation and sampling plan.
How can I contact you?
Use the inquiry form on this page, email us, or reach us via WhatsApp / WeChat. A dedicated project manager will follow up within one business day.
Request a Quote
Tell us quantity, size and target market — our team replies within one business day.
Send Inquiry