KindPack RollForm Print Film
Printed rollstock for automated VFFS lines, supplied with a registered repeat for accurate cut-off and low film waste. Rebuilt into the KP-ECO-007 Single-Serve Mono-PE Portion Pouch for Training Treats and Toppers green parameter family: thin-gauge mono-PE portion and roll-stock direction. Blank front panel, no brand on the pack. All specifications are Draft / Indicative / To Confirm - not a quote.
Specifications
| Product Type | Rollstock Film for Form-Fill-Seal Lines | Structure | Rollstock Film for Form-Fill-Seal Lines |
|---|---|---|---|
| Closure | Closure is created by the customer's form-fill-seal machine; film is supplied with a registered print repeat to align optional zipper application | Material direction | Thin-gauge mono-PE portion and roll-stock direction |
| Thickness | 70-110 micron total | Standard sizes | Roll format custom to bag size; typical finished packs 0.5 lb - 10 lb (227 g - 4.5 kg) |
| Finished dimensions | Roll format, custom to bag size; typical finished packs 0.5 lb - 10 lb (227 g - 4.5 kg). | Flexographic surface print, up to 8 stations, water-based inks at high line speed; register to be set for the narrow web width | |
| Finish | Gloss or matte finish depending on the print line; no foil, no metallic ink and no cold-seal coating that would add a second material | Window | None. The pack is fully printed or left as a solid unprinted area; a clear window on a portion pack adds a material and is not offered |
| Handle | None. Not applicable to this format | Valve or spout | None. No valve and no spout; this is a tear-open portion pack |
| Environmental status | Claim pending - not verified | MOQ | 300 kg / SKU (rollstock) |
| Lead time | Sample: 7-12 business days; mass production: 20-32 business days | Commercial terms | Ex-works unit price and shipping terms to be confirmed on quotation |
About this product
RollForm is the film-first option for brands that bag on their own equipment. Graphics are reverse-printed and protected inside the laminate so scuffing on the machine cannot dull the artwork, and print repeat is registered to the buyer's cut length to minimize wasted film at start-up and changeover. The blueprint-technical graphic language is designed to communicate precision and diligence, which suits performance and veterinary-channel brands. Film width, core size and wind orientation are specified per machine. In the rebuilt 36-SKU green matrix this product is re-homed to parameter family KP-ECO-007 - Single-Serve Mono-PE Portion Pouch for Training Treats and Toppers - on the basis of structure-first match: roll-stock film fed to a form-fill-seal line, the same supply form as the portion-pouch family. The family design direction is: Cut film gauge to the minimum that still seals at line speed; keep the pouch mono-material PE; avoid a separate clear window or a paper layer on a small format; use water-based inks; and investigate whether the finished portion size can stay above any minimum size threshold used for film collection, rather than assuming eligibility. The front panel stays blank and carries no brand of ours, so the buyer's own label can be applied. Nothing here is a verified environmental statement: CLAIM PENDING - NOT VERIFIED. No recyclability, recycled-content or mono-material claim is validated for this SKU. Small-format films are frequently below the size threshold used by recovery programmes, and this must be checked rather than assumed. Any PCR figure, any store drop-off wording and any material-reduction claim require supplier declarations and a programme eligibility check first. Permitted wording today: 'mono-material PE direction, small-format recovery eligibility under verification'. Duties & taxes are not included in quoted prices.
Built for US and Canadian co-packers and brand owners running automated bagging lines, where repeat accuracy, low film waste and consistent print registration on every cycle matter more than a decorative silhouette. Re-homed into the KP-ECO-007 family, the North America positioning holds: Aimed at the US and Canadian training-treat, sample and topper segment, where portion packs move through subscription boxes, vet clinics and retail clip strips. Roll-stock feeding gives high output per shift, the flat profile keeps postage and parcel weight low, and the blank front area suits a buyer's brand plus a legibility zone.
Key Features
✓ Registered print repeat matched to the buyer's cut length
✓ Reverse-printed graphics protected from machine scuffing
✓ Tight roll tolerance and consistent wind for stable web tracking
✓ Matte or gloss surface options in one program
✓ Thin-gauge mono-PE portion and roll-stock direction for source reduction - claim pending verification
FAQ
Is your company a manufacturer or a trading company?
We are a direct manufacturer with our own factory in Dongguan, Guangdong, China, founded in 2014. You are welcome to arrange a virtual or on-site factory tour.
Can your packaging be customized?
Yes. We provide full OEM/ODM services including custom printing, size, material structure, pouch type, zipper / spout / handle options, and artwork support.
What types of packaging bags can you produce?
We produce stand-up pouches, flat bottom bags, spout pouches, retort pouches, side gusset bags, quad seal bags, kraft paper bags, mono-material recyclable bags, window bags, and bulk bags.
How do I request a quotation?
Please share your bag type, target size, estimated order quantity, material preference, and design artwork (AI or PDF). Our sales team will reply with a detailed quotation and sampling plan.
How can I contact you?
Use the inquiry form on this page, email us, or reach us via WhatsApp / WeChat. A dedicated project manager will follow up within one business day.
Request a Quote
Tell us quantity, size and target market — our team replies within one business day.
Send Inquiry