KindPack ShapePaw Die-Cut Pouch
Custom die-cut pouch with a shaped silhouette that stands out on impulse pegs and gift displays. Rebuilt into the KP-ECO-007 Single-Serve Mono-PE Portion Pouch for Training Treats and Toppers green parameter family: thin-gauge mono-PE portion and roll-stock direction. Blank front panel, no brand on the pack. All specifications are Draft / Indicative / To Confirm - not a quote.
Specifications
| Product Type | Shaped Custom-Die-Cut Pouch | Structure | Shaped Custom-Die-Cut Pouch |
|---|---|---|---|
| Closure | Press-to-close strip on the straight top edge with a shaped tear notch | Material direction | Thin-gauge mono-PE portion and roll-stock direction |
| Thickness | 100-130 micron total | Standard sizes | 2 oz / 4 oz / 6 oz (57 g / 113 g / 170 g) |
| Finished dimensions | 2 oz / 4 oz / 6 oz (57 g / 113 g / 170 g). | Flexographic surface print, up to 8 stations, water-based inks at high line speed; register to be set for the narrow web width | |
| Finish | Gloss or matte finish depending on the print line; no foil, no metallic ink and no cold-seal coating that would add a second material | Window | None. The pack is fully printed or left as a solid unprinted area; a clear window on a portion pack adds a material and is not offered |
| Handle | None. Not applicable to this format | Valve or spout | None. No valve and no spout; this is a tear-open portion pack |
| Environmental status | Claim pending - not verified | MOQ | 10,000 pcs / SKU (first run) |
| Lead time | Sample: 15-20 business days; mass production: 30-45 business days | Commercial terms | Ex-works unit price and shipping terms to be confirmed on quotation |
About this product
ShapePaw trades the standard rectangle for a shaped outline. The die-cut silhouette carries through the whole pack, so a brand can become recognizable by profile alone on a crowded pegboard, and the shape naturally supports seasonal and gift-set merchandising. The top edge stays straight so zipper or reseal hardware still functions normally, and a shaped tear notch aligns with the die line. Playful paw and confetti patterns in candy-bright colors target gift, holiday and new-pet occasions. In the rebuilt 36-SKU green matrix this product is re-homed to parameter family KP-ECO-007 - Single-Serve Mono-PE Portion Pouch for Training Treats and Toppers - on the basis of structure-first match: three-side-seal / stand-up base with a straight top edge, the same portion-pouch build; the die-cut silhouette is a tooling variant. The family design direction is: Cut film gauge to the minimum that still seals at line speed; keep the pouch mono-material PE; avoid a separate clear window or a paper layer on a small format; use water-based inks; and investigate whether the finished portion size can stay above any minimum size threshold used for film collection, rather than assuming eligibility. The front panel stays blank and carries no brand of ours, so the buyer's own label can be applied. Nothing here is a verified environmental statement: CLAIM PENDING - NOT VERIFIED. No recyclability, recycled-content or mono-material claim is validated for this SKU. Small-format films are frequently below the size threshold used by recovery programmes, and this must be checked rather than assumed. Any PCR figure, any store drop-off wording and any material-reduction claim require supplier declarations and a programme eligibility check first. Permitted wording today: 'mono-material PE direction, small-format recovery eligibility under verification'. Duties & taxes are not included in quoted prices.
Built for US and Canadian impulse displays where silhouette is the differentiator; a distinctive die-cut shape creates a recognizable peg presence and supports gift and holiday sets. Re-homed into the KP-ECO-007 family, the North America positioning holds: Aimed at the US and Canadian training-treat, sample and topper segment, where portion packs move through subscription boxes, vet clinics and retail clip strips. Roll-stock feeding gives high output per shift, the flat profile keeps postage and parcel weight low, and the blank front area suits a buyer's brand plus a legibility zone.
Key Features
✓ Custom die-cut silhouette for instant peg recognition
✓ Straight top edge keeps closure hardware functional
✓ Shaped tear notch aligned to the die line
✓ Holiday and gift-set merchandising friendly
✓ Thin-gauge mono-PE portion and roll-stock direction for source reduction - claim pending verification
FAQ
Is your company a manufacturer or a trading company?
We are a direct manufacturer with our own factory in Dongguan, Guangdong, China, founded in 2014. You are welcome to arrange a virtual or on-site factory tour.
Can your packaging be customized?
Yes. We provide full OEM/ODM services including custom printing, size, material structure, pouch type, zipper / spout / handle options, and artwork support.
What types of packaging bags can you produce?
We produce stand-up pouches, flat bottom bags, spout pouches, retort pouches, side gusset bags, quad seal bags, kraft paper bags, mono-material recyclable bags, window bags, and bulk bags.
How do I request a quotation?
Please share your bag type, target size, estimated order quantity, material preference, and design artwork (AI or PDF). Our sales team will reply with a detailed quotation and sampling plan.
How can I contact you?
Use the inquiry form on this page, email us, or reach us via WhatsApp / WeChat. A dedicated project manager will follow up within one business day.
Request a Quote
Tell us quantity, size and target market — our team replies within one business day.
Send Inquiry