KindPack SnapTab Pull-Zipper Pouch
Cat kibble pouch with a pull-tab zipper that opens in one motion and reseals by pressing flat. Rebuilt into the KP-ECO-001 Mono-PE Single-Stream Stand-Up Doypack green parameter family: mono-material PE, single-stream film direction. Blank front panel, no brand on the pack. All specifications are Draft / Indicative / To Confirm - not a quote.
Specifications
| Product Type | Pull-Tab Zipper Stand-Up Pouch | Structure | Pull-Tab Zipper Stand-Up Pouch |
|---|---|---|---|
| Closure | Integral pull-tab slider-free zipper that opens with a single pull and re-closes by pressing | Material direction | Mono-material PE, single-stream film direction |
| Thickness | 110-135 micron total at the body, higher at the zipper weld zone | Standard sizes | 1 lb / 3 lb / 6 lb (454 g / 1.36 kg / 2.7 kg) |
| Finished dimensions | 1 lb / 3 lb / 6 lb (454 g / 1.36 kg / 2.7 kg). Finished size W x H + bottom gusset (mm): 1 lb approx. 180 x 270 + 60; 3 lb approx. 230 x 340 + 75; 6 lb approx. 270 x 410 + 90. | Flexographic surface print, up to 8 stations, water-based inks with a solvent-free lamination direction | |
| Finish | Matte body with a low-gloss sealant band on the back panel; no foil, no metallic ink and no film lamination that would break the single-material direction | Window | None in the default single-material build. A PE window is technically possible but must be re-verified as part of the same material stream before it is offered |
| Handle | None in the default build. A die-cut top handle is available as an option on the 6 lb and 12 lb sizes and would add a reinforced patch - to be confirmed for material-stream compatibility | Valve or spout | None by default; no degassing valve in the standard kibble build. A mono-material degassing valve option for high-fat formulas (to be confirmed) |
| Environmental status | Claim pending - not verified | MOQ | 5,000 pcs / SKU (first run) |
| Lead time | Sample: 12-18 business days; mass production: 30-45 business days | Commercial terms | Ex-works unit price and shipping terms to be confirmed on quotation |
About this product
SnapTab answers the most common cat-owner complaint about resealable bags: fiddly zipper starts. A molded pull-tab zipper profile opens with one pull and closes with a simple press, which keeps the reorder rate high and the aroma complaints low. The deep indigo body with a cold-foil constellation pattern signals a nighttime cat-care positioning, and the matte varnish band gives a soft hand-feel against the gloss body. Sized for 1 lb trial through 6 lb household formats. In the rebuilt 36-SKU green matrix this product is re-homed to parameter family KP-ECO-001 - Mono-PE Single-Stream Stand-Up Doypack - on the basis of structure-first match: stand-up doypack body with a bottom gusset; the pull-tab zipper is carried as a closure variant of the family. The family design direction is: Mono-material PE only, with no mixed polymer layers, so the pack can stay in one film stream; water-based inks; solvent-free lamination; source reduction by downgauging; a PCR content direction; and a zipper from the same PE family so the closure does not contaminate the stream. The front panel stays blank and carries no brand of ours, so the buyer's own label can be applied. Nothing here is a verified environmental statement: CLAIM PENDING - NOT VERIFIED. No recyclability, recycled-content, mono-material or compostability claim is validated for this SKU today. Before any on-pack, listing or sales wording, the following must be documented and approved: (1) the film resin family declaration and the supplier recyclability statement; (2) a store drop-off eligibility assessment in the US and a provincial programme check in Canada; (3) evidence for any post-consumer recycled content figure (physical content or mass balance); (4) evidence for any material-reduction figure. Until then use only 'recyclable-direction material - verification pending'. Duties & taxes are not included in quoted prices.
Aimed at millennial cat-owner e-commerce listings, where one-hand zipper operation is a review-driving feature; front panel sized for a strong main image on Amazon and Chewy mobile thumbnails. Re-homed into the KP-ECO-001 family, the North America positioning holds: Built for US and Canadian pet specialty, grocery and farm-store aisles where packaging EPR and recycled-content rules are tightening. Sized for a 4 in shelf facing and for parcel shipping, with the back panel reserved for bilingual EN / FR ingredients, feeding guidance and disposal wording that can be updated as soon as a claim is verified.
Key Features
✓ Single-pull tab opening, press-flat reseal
✓ Zipper seated deep enough for full 6 lb fills
✓ Cold-foil accent for premium shelf contrast
✓ Thick bottom gusset resists tipping when 80% empty
✓ Single-material PE construction direction so the body and closure stay in one film stream - claim pending verification
FAQ
Is your company a manufacturer or a trading company?
We are a direct manufacturer with our own factory in Dongguan, Guangdong, China, founded in 2014. You are welcome to arrange a virtual or on-site factory tour.
Can your packaging be customized?
Yes. We provide full OEM/ODM services including custom printing, size, material structure, pouch type, zipper / spout / handle options, and artwork support.
What types of packaging bags can you produce?
We produce stand-up pouches, flat bottom bags, spout pouches, retort pouches, side gusset bags, quad seal bags, kraft paper bags, mono-material recyclable bags, window bags, and bulk bags.
How do I request a quotation?
Please share your bag type, target size, estimated order quantity, material preference, and design artwork (AI or PDF). Our sales team will reply with a detailed quotation and sampling plan.
How can I contact you?
Use the inquiry form on this page, email us, or reach us via WhatsApp / WeChat. A dedicated project manager will follow up within one business day.
Request a Quote
Tell us quantity, size and target market — our team replies within one business day.
Send Inquiry